MAKO 4matic

The MAKO 4matic is an automated, full-featured 4-page CTP solution developed for commercial printers that demand high quality output while maintaining a cost-effective operation. It provides a simple and easy transition to CTP production with no compromise on quality, reliability or productivity – the ideal replacement for aging imagesetter technology.

• Accommodates the widest range of 2, 4, and 6 page presses.
  
  
• Delivers in excess of 20 Speedmaster 74 plates per hour at 2400 dpi.
  
  
• Accommodates any plate size between 384mm x 290mm (15.15" x 11.4") to 635mm x 927mm (25" x 36.5"), providing generous space for oversized jobs such as 6-page gatefolds.
  
  
• Optional automated in-line press notch punching. Can accommodate either Bacher support (220mm and 425mm) or Komori support (550cm) or both. Can also include custom press notch configurations.
  
  
• Operates in normal daylight conditions
  
  
• Easy to install, operate and maintain. Uses standard power outlets and easily integrates into existing workflows through 1-bit TIFF compatibility.
  
  
• No hidden extras – our online conveyor is standard on all MAKO CTP, allowing for a direct connection to the processor at no extra cost.
  
  
• Features a straight-through plate path with no complex load/unload cycle.
  
  
• ECRM’s patented FleXarm slip sheet removal system makes automation a realistic possibility for smaller and medium-sized printers.
  
  
• Basic electricity requirements and quick installation – no dedicated power line needed. Low energy consumption, draws the same energy as a PC.
  
  
• Simple and intuitive operator interface makes training easy for everyone.

Plate Sizes
Maximum: 635mm x 927mm (25.0" x 36.5")
Minimum: 384mm x 290mm (15.15" x 11.4")

Plate Thickness
0.14mm to 0.35mm (0.0055" to 0.014")

Media Types
Violet-sensitive photopolymer and silver halide metal plates.
See media specifications for safe-light information.

Plate Cassette Capacity
60 plates

Recording Source
Violet laser diode (405 nm), available for photopolymer or silver halide plates

Maximum Line Screen
Up to 200 lpi (78.7 lpcm). Media dependent

Resolutions
Seven resolutions from 1200 to 3556 dpi (472 to 1400 dpcm)
Resolutions include; 1200, 1270, 1800, 2400, 2540, 3048, and 3556dpi

Image Scaling
Image scaling from 85% to 110% of original

Repeatability
0.025mm (0.001") typical
May vary according to media type and processing conditions

Air Supply Requirement
6.2 BAR @ 283L/min (10CFM @ 90 PSI) (Required for slip sheet removal option)

Processing
Online: The plate transport automatically moves the plate into the processor.

Environmental
Power: 100 - 240 Volts; 3 Amps; 250 watts maximum; 50/60Hz, single phase. Heat Dissipation: 850 BTU/hour

Operating Conditions
62 - 86o F (17 - 30o C); relative humidity 45 - 65%, non-condensing. Relative humidity outside of this range may affect performance. Operating conditions outside plate media specifications may affect performance.

Weight
409 kg (900 lbs.)

Footprint Dimensions
Width: 86.5cm (34.0") Length: 336.0cm (132.6") Height: 191.0cm (75.1")