Dart 4300
CTP solutions that are unbeatable for their quality, accuracy, and reliability. They consistently output plates with a dot sharpness and registration accuracy that enable superior process control and fast makeready times. They also offer the benefits of easy daylight handling and exceptional production efficiency for both short and long runs.
The Dart 4300S and 4300E are specifically designed to provide optimal versatility in plate production for 4-page and 2-page presses. The Dart 4300S is a high-speed model that can comfortably and consistently output up to 21 plates per hour.

Plate Sizes
Maximum: 560mm x 670mm (22.0” x 26.4”)
Minimum: 228mm x 252mm (8.9” x 9.9”)

Plate Thickness
0.14mm to 0.35mm (0.0055” to 0.014”)

Media Types
Violet-sensitive photopolymer and silver halide metal plates.
See media specifications for safe-light information.

Recording Source
Violet laser diode (405 nm), available for photopolymer or silver halide plates

Resolutions
Seven resolutions from 1200 to 3556 dpi (472 to 1400 dpcm)
Resolutions include: 1200, 1270, 1800, 2400, 2540, 3048, and 3356dpi

Maximum Line Screen
Up to 200 lpi (78.7 lpcm). Media dependent

Repeatability
0.025mm (0.001”) typical
May vary according to media type and processing conditions

Processing
Plates are moved to processor automatically by a transport bridge - standard equipment on MAKO 2.

Environmental
Power: 100 - 240 Volts; 3 Amps; 250 watts maximum; 50/60Hz, single phase
Heat Dissipation: 850 BTU/hour

Operating Conditions
62-86 degree F (17-30 degree C); ); relative humidity 45 - 65%, non-condensing. Relative humidity outside of this range may affect performance. Operating conditions outside plate media specifications may affect performance.

Weight
145.5 kg (320 lbs.)

Footprint dimensions
96.5cm (38.0”) Length: 160.0cm (63.0”) Height: 188.0cm (74.0”)